Manley MONO & DUAL MONO 40 dB MICROPHONE PREAMPLIFIER Uživatelský manuál stáhnout pdf (Strana 11)

SPECIFICATIONS

Vacuum Tubes: 1 x 6072A, 1 x 6414 per channel

Frequency Response 20 Hz - 60 KHz ( +/- 1 dB)

THD 05% @ 1kHz, +4 dBv out

Signal to Noise Ratio 80 dB or better typical

depends on settings and tubes

Maximum Output +32 dBv ( 70 volts RMS ! )

+15 dBm into 600 Ω

Maximum Input 450 mV with maximum gain settings

The Input Attenuator is before the tubes so normal maximum input is much higher.

Gain 40 to 50 dB maximum gain depending

on the setting of the GAIN SWITCH

Input Impedance 2400 Ohm, transformer coupled

optimised for mics with 100 to 600 ohm output impedances

300 KΩ 1/4 direct input

Output Impedance 50 ohms (from 20 Hz to 20 kHz)

best driving 10 KΩ or higher

will drive 600Ω input with less headroom

Transformer coupled balanced output

MULTI CAP™coupled unbalanced output

Power Consumption 18 Watts

Size 19" X 1.75" X 10" (1U)

Shipping Weight 12 lbs

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Žádné komentáře

Manley MONO & DUAL MONO 40 dB MICROPHONE PREAMPLIFIER Uživatelský manuál Strana 11